Repository logo

Chemical Engineering

Permanent URI for this communityhttps://hdl.handle.net/10413/6527

Browse

Browsing Chemical Engineering by Subject "Acids--Purification--Distillation process."

Filter results by typing the first few letters
Now showing 1 - 1 of 1
  • Thumbnail Image
    Item
    Multipurpose separation and purification facility.
    (2001) Sewnarain, Reshan.; Ramjugernath, Deresh.
    A waste acid stream is being produced by a local petrochemical company (SASOL) at a rate of 10 000 -12 000 tons per annum and contains approximately 44-mole % butyric acid, 20 % isobutyric acid and 10 % valeric acid. Whilst this stream is currently being incinerated, SASOL has requested an investigation into the possibility of separating and purifying butyric acid and isobutyric acid from this waste acid stream. The goal of this project was to determine a separation and purification route for butyric acid and isobutyric acid from SASOL'S waste acid stream. In order to achieve this, vacuum distillation and freeze crystallization were chosen for the recovery and purification of the acids respectively. Vapour-liquid equilibrium data for key component pairs present in the waste acid stream (propionic acid + butyric acid, isobutyric acid + butyric acid, butyric acid + isovaleric acid and butyric acid + hexanoic acid) were experimentally determined in a dynamic VLE still. The measured VLE data was successfully correlated us ing the gamma-phi approach. with the NRTL activity coefficient model representing the liquid phase and the virial equation of state describing the vapour phase. Using these equations. the VLE data obtained from the experimental work was then regressed to provide interaction coefficients for the NRTL model. which were then used in the Hysys process simulator to explore a range of design alternatives for distillation. Hysys simulations showed that greater than 80 % butyric acid and isobutyric acid can be recovered from the waste acid stream in a single distillation column containing 18 theoretical stages and an optimum reflux ratio of 3.8. The simulation was performed at a pressure of 58kPa and a maximum operating tempe rature of 150°C. Batch distillation experiments performed in a batch rectification column at 250kPa recovered more than 90% of both the butyric acid and isobutyric acid from a 450ml sample of the waste acid stream. A subsequent batch experiment concentrated the recovered acids into a distillate containing more than 95 % butyric acid and isobutyric acid combined. To investigate freeze crystallization as a suitable operation for purifying butyric acid and isobutyric acid a solid-liquid phase equilibrium curve for the system was generated us ing the Van Hoft equation. The generated curve showed that butyric acid and isobutyric acid could be theoretically purified (>98%) by operating two crystallizers at -20°C and -55°C respectively. A simple freeze crystallization experiment produced butyric acid with greater than 94% purity. An economic feasibility study conducted on the process showed that separation and purification of the acids by this process (distillation and crystallization) could create a business opportunity with revenue of approximately R47 million per annum. Preliminary estimates for capital investment amounted to approximately R5.4 million. for which the payback period was estimated at less than one year.