Repository logo
 

Synthesis, magnetic and electrical characterizations of nanoparticle ferrites.

Loading...
Thumbnail Image

Date

2012

Journal Title

Journal ISSN

Volume Title

Publisher

Abstract

The synthesis, structure and physical properties of a series of Mnx(Co, Mg)₁ˍxFe₂O₄, (Mg, Sr)₀.₂ Mn₀.₁Co₀.₇Fe₂O₄ and Mg₀.₅Mn₀.₅(RE)₀.₁Fe₁.₉O₄ (where RE are rare earth elements) nanoferrites have been studied. These compounds were synthesized at low reaction temperature of about 200 ⁰C using the glycol-thermal method. The starting materials were high-purity metal chlorides or nitrates which were precipitated by NH₄OH and KOH respectively. In addition, MnxCo₁₋xFe₂O₄ (x = 0, 0.5 and 1) samples were produced directly from high-purity metal oxides by high-energy ball milling technique. Single-phase cubic spinel structure and nanoparticle structure of the synthesized samples were confirmed by X-ray diffraction (XRD) and transmission electron microscope (TEM). The results show that the produced powders of the asprepared samples have average grain sizes ranging from 7 to 16 nm. Filtering the precipitates by Whatman glass microfiber filters (GF/F) appears to be important in obtaining the small particle sizes. We suspect higher stability of the MnxCo₁₋xFe₂O₄ at x = 0 and 0.5 where complete symmetry in the proportion of the atoms on tetrahedral (A) and octahedral (B) sites would tend to favour larger nanoparticles. The evolutions of the magnetic properties as a function of composition, annealing temperature under air and argon atmospheres or measuring temperature have been investigated by ⁵⁷Fe Mössbauer spectroscopy, vibration sample magnetometer (VSM) and superconducting quantum interference device (SQUID). Significant changes in magnetic properties are observed across the composition ranges studied. The Mössbauer spectra indicate ferrimagnetic, superparamagnetic and paramagnetic behaviours of the compounds. The results show evidence of transformation from single-domain to multi-domain structure with thermal annealing in our samples. Temperature dependence of magnetization shows differences between field cooling (FC) and zero field cooling (ZFC) which we attribute to spin-freezing and thermal relaxation for typical nanoparticles. Significant increase in coercive field with reduction in measuring temperature is obtained in Co- based compounds. Mn₀.₅Co₀.₅Fe₂O₄, Sr₀.₂Mn₀.₁Co₀.₇Fe₂O₄ and Mg₀.₂Mn₀.₁Co₀.₇Fe₂O₄ have large coercive fields of 1.45, 3.02 and 10.70 kOe at 4 K compared to 0.17, 0.05 and 0.05 kOe at room temperature respectively. Variation of coercive fields (Hc) with measuri ing temperature for MnxCo₁₋xFe₂O₄ (x = 0.1 and 0.05), (Mg, Sr)₀.₂Mn₀.₁Co₀.₇Fe₂O₄ nanoferrites follow the Kneller's law for uniaxial non-interacting single domain particles of the form Hc(T) = Hc(0)[1-( T/Tβ)α]. The observed temperature dependences are consistent with α = 1/2. We also find evidence of the departure from this law at lower temperature. The temperature dependence of the saturation magnetizations were observed to vary with temperature according to the modified Bloch's law Ms(T) = Ms(0)[1 - ( T/T₀)ᵝ] where β is at least 1.5. This is attributed to the confinement effects of the spin-wave spectrum for magnetic clusters. The equation appears to fit the saturation magnetization data over the entire temperature range with values of β from 2.1 to 2.4 for the samples studied. These results are consistent with the nanoparticle nature of the compounds. In Mg₀.₅Mn₀.₅(RE)₀.₁Fe₁.₉O₄ nanoferrites, the grain sizes, lattice parameters and saturation magnetizations increase with RE substitution which we attribute to larger RE ions substituting smaller Fe ions. The results show evidence of superparamagnetic behaviour of the nanoparticles. The highest grain size and magnetizations are obtained for the Gd substituted sample. We find strong correlation between the saturation magnetizations, grain sizes and microstrains with de Gennes factor G. The correlation with grain sizes and microstrains appear to be unique and characteristic of the nanoparticle nature of the compounds. Bulk samples in the form of pellets were also produced from the as-prepared samples of MnxCo₁₋xFe₂O₄ for resistivity measurements. The temperature dependence of the electrical resistivity for samples sintered from 600 - 1100 ⁰C under argon atmosphere were studied using the four-probe method from room temperature to about 110 ⁰C. Two possible mechanisms for resistivity involving Tˉ¹ and Tˉ¹/² dependences were investigated which we associated with semiconducting and inter-grain conductivity respectively. The Tˉ¹/² dependence is found to fit the data better and predicts higher activation energies. The resistivity was observed to be sensitive to the surface of the pellet being probed and the annealing temperature.

Description

Thesis (Ph.D.)-University of KwaZulu-Natal, Durban, 2012.

Keywords

Ferrites (Magnetic materials), Nanostructured materials., Mössbauer spectroscopy., Theses--Physics.

Citation

DOI